Description
TOMEI is a self-powered, digitally optimized, virtually plug-n-play loudspeaker system. Plug-in your computer or wi-fi module and grab your smartphone to start. It’s that simple!
Every TOMEI system comes with sophisticated digital crossovers, a DAC for each frequency band, and individual amplifiers to power each driver. In such a system, each part is perfectly matched to the next, unlike standard audio systems built from disparate components. You can HEAR and FEEL it when listening to an Open Air TOMEI loudspeaker system.
- Open Air loudspeaker system
- Acrylic and genuine wood architecture
- System frequency response: 27 – 30000 Hz @ -2 dB
- Digital Signal Processor: 1.5GFlops, 40-bit/768 Khz
- Power Amplifiers : 1000 watts total power.
SATELLITE SPEAKERS
Accurate, highly resolving and transparent sound.
These results are made possible by the seamless integration of drivers using a high definition digital signal processor (DSP).
- Two-way Open Air active loudspeaker with nine acrylic diffusion ribs on a genuine American walnut stand.
- 125 mm mid driver membrane diameter
- 29 mm ring dome tweeter
- Amplifiers: 3 x new generation Class D amplifiers (280 watts to each mid drivers, 100 watts to each tweeters, 280 watts for bass unit.).
- Dynamic range: 119 dB
- Intermodulation distortion: mid drivers: 0.003% – tweeters: 0.0028%
- Dimensions: width 20 cm, depth 25 cm, height 105 cm
- Colors: available: Acrylic: crystal glass, vanilla ice or onyx black – Wood: Natural or Gray tainted
BASS UNIT
Precise, thunderous bass.
- Open Baffle active bass unit
- Genuine American walnut panel
- 350 mm bass driver membrane diameter
- 75 mm voice coil
- Linear coil travel: 22 mm
- Fs: 19 Hz
- Amplifier: 1 x 280 watts class D amplifier
- Dimensions: width 40 cm, depth 25 cm, height 50 cm
- Colors: available in crystal ice, onyx black, vanilla ice or smoked grey acrylic
CONTROL UNIT
The ACU-02 unit contains the digital crossovers, the amplifiers, the USB Audio Class 2 circuit and the D to A and A to D converters. The result is TÔMEI, a spatially coherent, transparent-to-source system, with “you are there” holographic presentation.
To reach that level of performance, we use a sophisticated Digital Signal Processor (DSP) to optimize the entire speaker’s amplitude, impulse, and phase response. No analog XO could manage this.
- Stainless steel and acrylic casing
- 3 x 1000 watts peak stereo Class D amplifiers
- 1.5GFlops 40-bit/768 Khz 4th generation floating point DSP
- User settings: Source select, volume level, muting, bass and tweeter shelf adjust (level), analog input sensitivity, DAC output level, DAC and A to D filters.
- User access: Remote control for all functions or using the front panel knob
- XLR balanced and RCA unbalanced analog inputs
- 1 x digital S/PDIF input (32 bits / 192 Khz)
- 1 x USB Audio Class 2 input (32 bits / 384 Khz)
- Loudspeaker cables included
- 3 x Neutrik speakon loudspeaker outputs
- Dimensions: width 45 cm, depth 37.5 cm, height 12.5 cm
- Colors: available in crystal ice, onyx black, snow white or smoked grey acrylic
